Mini hour counters, for AC or DC, 24 x 24 mm
If you want to register operation hours and have only minimum space available, then you can count on the mini counter with a counting range of rounded up 10.000 hours. This counter needs only a cutout of 22,3 mm.
Accessoires and special types at additional cost:
- Variants for 20 to 100 HZ operation:
Order code i.e.: 200.4/943, but only up to 24 V AC or a pre-resistor is needed - Type 200.4 R with 2 counting inputs:
For recording of different sizes
AC: 200.4
Reset:
No
Counting range:
9999,9 h
Digits:
1,5 x 3,5 mm (with lens) white on black, decimals black on white
Voltages:
12 – 24 or 230 V AC
Special voltages (at additional cost):
36 – 60, 60 – 140 V AC, over 230 V with separate capacitor
Voltage tolerance:
±10 %
Frequency:
50 or 60 Hz (on request 20 - 10 0 Hz operation)
Current consumption:
Approx. 8 mA
Protection class:
Housing: IP 54
DIN 40050:
Terminals: IP 00
Ambient temperature:
–30 °C to +80 °C
Fixing:
Spring wire
Approval:
CE
Operation indication:
Yes
Cutout:
ø 22,3 mm, for an optimal fixing
Mounting depth:
34 mm at 12 - 24 V counters, 68,5 mm at higher voltages
Connection:
At 12 – 24 V, plugs 1,5 x 0,5 as solder part, for all higher voltages 2 plugs 6,3 x 0,8 mm
Weight:
Approx. 30 g
DC: 208
Reset:
No
Counting range:
9999,9 h
Digits:
1,5 x 3,5 mm (with lens) white on black, decimals black on white
Voltages:
10 – 27 V AC/DC
Special voltages (at additional cost):
-
Voltage tolerance:
-
Frequency:
-
Current consumption:
7,5 – 39 mA
Protection class:
Housing: IP 54
DIN 40050:
Terminals: IP 00
Ambient temperature:
– 10 °C to +50 °C
Fixing:
Spring wire
Approval:
CE
Operation indication:
Yes
Cutout:
ø 22,3 mm, for an optimal fixing
Mounting depth:
68,5 mm
Connection:
2 plugs 6,3 x 0,8 mm
Weight:
Approx. 30 g
